SSD Heat Sink AOSOR CM-M2F

Active M.2 SSD heatsink with an integrated fan and ARGB lighting. Designed to cover M.2 2242/2260/2280 drives, it provides direct-contact cooling to the controller area of NVMe drives — suitable for both desktop builds and compact systems where extra cooling is needed during sustained loads.

The unit pairs an aluminum finned body with a thin brass/copper contact plate and silicone thermal pads; a small high‑speed blower (listed around 9,000 RPM by retailers) forces air through the fins to lower SSD temperatures under heavy use. Power and lighting use a 5V ARGB 3‑pin connector; mounting screws and thermal pads are included for installation.

Good for users experiencing SSD thermal throttling during long transfers or heavy workloads (video editing, rendering, databases), and for anyone who wants an RGB accent on their build without a large dedicated cooler.

Specifications

• Compatibility: M.2 2242 / 2260 / 2280 (NVMe, M‑key)
• Heatsink material: Aluminum alloy
• Contact plate: 1 mm brass/copper plate (included)
• Thermal pads: Included (documents list 1.0 mm and 0.5 mm pads)
• Fan speed: Approximately 9,000 RPM (manufacturer/retailer descriptions)
• ARGB lighting: 5V ARGB, 3‑pin connector (cable included)
• Dimensions: Approx. 70–76 × 24–26 × 12–19 mm (varies by source; see manual)
• Weight: Approx. 42–45 g (with mounting hardware)
• Included: Heatsink with fan, thermal pads, mounting screws, ARGB cable